Moisture Bloc

Decorative Concrete, Concrete Admixtures, and Concrete Construction Materials

Vapor Reduction Systems

Vexcon has four MoistureBloc products to meet your projects specific needs

Vexcon’s MoistureBloc® Vapor Reduction Systems are guaranteed to reduce moisture vapor in concrete to three pounds or below. Moisture can come from ground water, atmospheric conditions, repeated floor cleaning or the concrete itself. When excess moisture is present in concrete, a common result is flooring adhesive failure. Wet adhesive can smell,

ooze between tiles, sheet flooring can indent or pop out and carpeting can lift up. In some cases mold, mildew and floor lifting can cause health and safety issues. Vexcon offers a wide range of product solutions specifically designed to meet the particular requirements of any flooring installation. Don’t wait for costly call backs and repairs, use MoistureBloc in

all your flooring installations.

Eliminate flooring failure due to moisture in concrete

• Effective mold and mildew blocker

• Low per-square-foot cost

• Apply to all concrete surfaces

• Cures new concrete

Prevents Excess Moisture • Alkali Resistant • Mold/Mildew Resistant

Protecting and improving concrete since 1974

Vexcon products meet the toughest current environmental and performance standards

in the market today. All Vexcon products comply with federal EPA and

state VOC regulations as well as numerous industry standards and specifications.

Consult specific product data sheet for more information.

Protect flooring installations from the ground up.

MoistureBloc cures new concrete–no waiting to install flooring.

MoistureBloc™General information


VOC Water Base:

MoistureBloc™ Emulsion One Step (VCI-MBEOS )
One coat application, minimal odor, very low per square foot coat, reduces moisture vapor readings ranging from 8-9 lbs. Guaranteed to prevent flooring adhesion failures from moisture vapor in concrete and alkali degradation. Promotes resistance to mildew, algae and bacteria.


MoistureBloc™ Emulsion Vapor Reduction System (VCI-MBEVR)
Easy two step application, minimal odor, low per square foot cost, reduces moisture vapor readings ranging from 12-15 lbs. Guaranteed to prevent flooring adhesion failures from moisture vapor in concrete and alkali degradation. Promotes resistance to mildew, algae and bacteria.
Step one:	Step two


VOC Solvent Base:

MoistureBloc™ Vapor Reduction System FT (VCI-MBVRSFT)
Fast track installation,18 hours from start to laying flooring, easy two step application, low odor, low per square foot cost, reduces moisture vapor readings ranging from 12-15 lbs. Guaranteed to prevent flooring adhesion failures from moisture vapor in concrete and alkali degradation. Promotes resistance to mildew, algae and bacteria
Step one	Step two	Step three


MoistureBloc™ MX (VCI-MBMX)
Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs. Promotes resistance to mildew, algae and bacteria.


VOC Not Required:

MoistureBloc™ Adhesive Remover (VCI-MBAR)
Strips adhesives from concrete floors and other concrete surfaces with relative ease. Removes many types of adhesives from concrete such as, cut back, latex and pressure sensitive. The product will also clean oil stains from concrete

[ Home ] [ Product List ] [ Customer Care / Contact Us ] [ Dealers ] [ Industry Links ] [ About Us ] [ Employment Opportunities ] [ Proud to Be American ]