|
Curing
Chemicals: |
|
|
GUIDE TO CURING: |
|
|
Resin Based: |
|
| Clear Resin Cure J11W (DSC-J11W) |
| Clear Resin Cure
J11W is an all resin, dissipating water-based curing compound. A
ready-to-use dissipating water-based resin curing compound for
use on freshly finished horizontal and vertical concrete
surfaces. Clear Resin Cure J11W is formulated to provide an
effective curing membrane that will begin to dissipate after
exposure to sunlight, weathering and/or traffic.
Features:
Water Based; Meets ASTM C-309; Approved by numerous state
highway departments; Clean-up with water; Dissipating Resin
Cure. |
  |
|
| Resin Cure With Dye J11WD (DSC-J11WD) |
| Resin Cure with Dye
J11WD is an all resin, dissipating water-based curing compound
containing a fugitive dye. A ready-to-use dissipating
water-based resin curing compound for use on freshly finished
horizontal and vertical concrete surfaces. Resin Cure with Dye
J11WD is formulated to provide an effective curing membrane that
will begin to dissipate after exposure to sunlight, weathering
and/or traffic.
Features:
Water Based; Meets ASTM C-309; Approved by numerous state
highway departments; Clean-up with water; Dissipating Resin
Cure; Contains a red fugitive dye. |
|
|
|
| White Resin Cure J10W
(DSC-J10W) |
| A water-based,
resin, liquid membrane forming curing compound for freshly
finished concrete. The White Resin Cure J10W is white pigmented
to reflect the heat of the sun. White Resin Cure J10W is a
curing compound formulated to retain moisture in freshly
finished concrete to insure full hydration of the cement.
Specifically designed for use on exterior commercial projects
such as highway pavements, residential paving, airport runways,
parking lots and other pavement projects. Features:
Water Based; Meets ASTM and AASHTO Standards; Approved by
numerous state highway departments; Clean-up with water; White
pigments to reflect the heat of the sun. |
|
|
|
|
Wax
Based: |
|
| City White Cure J8
(DSC-J8) |
| City White Cure J8
is an economical, V.O.C. compliant, water-based, white pigmented
concrete curing compound. This membrane forming cure is designed
especially for curing curbs, gutters, sidewalks and other
similar exterior concrete projects. Features:
Water Based; V.O.C. compliant; Clean-up with water; White
pigments to reflect the heat of the sun. |
|
|
|
| White Wax Cure CRD300
(DSC-CRD300) |
| A high solids, white
pigmented, water-based wax concrete curing compound formulated
to retain moisture in freshly finished concrete. The selected
white pigments reflect the heat of the sun, keeping the concrete
surface cooler. White Wax Cure CRD300 is a membrane forming wax
based material that seals in the necessary moisture for proper
cement hydration. Specially designed for use on exterior
commercial projects, such as highways, airport runways, concrete
lined canals, dams, parking lots, engineering projects and as
specified. Features:
Reduces shrinkage; retains moisture to reduce plastic
shrinkage cracks; Enhances performance; increases the
compressive strength over improperly cured concrete and adds a
quality appearance; Easy to spray; VOC Compliant; High
reflectivity; Increases wear resistance. |
|
|
|
| White Wax Cure J9A
(DSC-J9A) |
| A water-based, wax,
liquid membrane forming curing compound for freshly finished
concrete. The White Wax Cure J9A is white pigmented to reflect
the heat of the sun. White Wax Cure J9A is a curing
compound formulated to retain moisture in freshly finished
concrete to ensure full hydration of the cement. Specifically
designed for use on exterior projects such as highway pavements,
residential paving, airport runways, parking lots and other
pavement projects. Features:
Water Based; Meets ASTM and AASHTO Standards; Approved by
numerous state highway departments; Clean-up with water; White
pigments to reflect the heat of the sun. |
|
|
|
|
Evaporation
Retardants: |
|
|
GUIDE TO EVAPORATION RETARDANTS: |
|
|
Concentrated: |
|
| AquaFilm®
Concentrate J74 (DSC-ER-J74) |
| AquaFilm®
Concentrate J74 is a proprietary emulsion of unique organic
compounds designed to minimize moisture loss from fresh
concrete. AquaFilm®
Concentrate J74 is economical as a concentrate and is diluted
with potable water at a 9 to 1 ratio. As a water based polymer,
AquaFilm®
Concentrate J74 is V.O.C. compliant and contains a blue fugitive
dye for ease of visual inspection during application.
AquaFilm®
Concentrate J74 helps to produce dense, high quality concrete
flatwork by greatly reducing the rate of evaporation of moisture
from the concrete surface during the finishing process. This
reduction of moisture loss allows time for proper finishing,
while reducing plastic shrinkage cracking.
Features:
Greatly improves concrete workability during hot, direct
sunlight; dry or windy Conditions; Reduces Plastic shrinkage
cracking; Water based, no odor. Reduces or eliminates concrete
crusting during hot, windy conditions; Ideal for tough
situations - when concrete is starting to set before the
finisher can get to it or there is low water-cement ratios;
Increases productivity - concrete finishers can handle larger
areas; Compatible with concrete sealers or toppings; Provides
more time for finishing shake-on floor hardener projects |
|
|
|
|
Ready to Use: |
|
|
AquaFilm® Concentrate J74RTU
(DSC-ER-J74RTU) |
| AquaFilm®
J74RTU is a ready to use proprietary emulsion of unique organic
compounds designed to minimize moisture loss from fresh
concrete. As a water based polymer, AquaFilm®
J74RTU is V.O.C. compliant and contains a yellow fugitive dye
for ease of visual inspection during application. AquaFilm®
J74RTU helps to produce dense, high quality concrete flatwork by
greatly reducing the rate of evaporation of moisture from the
concrete surface during the finishing process. This reduction of
moisture loss allows time for proper finishing, while reducing
plastic shrinkage cracking. AquaFilm®
J74RTU is outstanding in reducing loss of surface moisture
during rapid drying conditions. Features:
Greatly improves concrete workability during hot, direct
sunlight; dry or windy Conditions; Reduces Plastic shrinkage
cracking; Water based, no odor. Reduces or eliminates concrete
crusting during hot, windy conditions; Ideal for tough
situations - when concrete is starting to set before the
finisher can get to it or there is low water-cement ratios;
Increases productivity - concrete finishers can handle larger
areas; Compatible with concrete sealers or toppings; Provides
more time for finishing shake-on floor hardener projects |
|
|
|
|
Surface
Protectant: |
|
| Face-Off™
DSC-SR-FO) |
| Face-Off is an
innovative surface protectant designed to keep splatter, color,
cementitious toppings, cures and retarder overspray from
adhering to the surfaces surrounding a concrete placing and
finishing operation. It replaces the need for costly plastic
barriers, which otherwise need to be taped in place while being
compatible with many surfaces including but certainly not
limited to masonry, stone and concrete. When applied to the face
of brick or tile prior to being placed in the form Face Off will
eliminate the adherence of grout or concrete, which may leak
through the joints during placement and vibration. Face-Off is
water-soluble and should be applied the same day of placement
for best results. It is easily removed when the general washing
of the concrete surface begins normally the next day. If the
removal processes on the following day does not include power
washing or scouring with a buffing pad and applying pressure
water, the protected area must be washed clean in 24–36 hours to
prevent the splatter from adhering Features:
Protects surfaces from overspray or splatters; Easier to use
than plastic coverings; Easy to remove; Water clean-up |
 |
| |
|
Surface
Retarders: |
|
| Top Cast® (DSC-SR-TC) |
| Top Cast®
is a water-based, top-surface retarder
which does not require covering with plastic for protection. It
is available in 11 depths of etch, each one color and number
coded for safety and convenience. Ideal for cast-in-place
flatwork and the top surface of pre-cast concrete panels. The
wide selection of grades available provides a comprehensive
range of effects, from a simulated light acid wash or sand blast
finish up to full exposure of 1 1/4 in. (32 mm) aggregate.
Features:
Comprehensive range of etch depths; Excellent depth of etch
control; Color and Number coded products; Pigmented for ease of
application; Excellent coverage rates; Requires no plastic
covering; Fast turnaround; Low odor. |
|
|
|
TOP
CAST BROCHURE: |
|
GUIDE TO
PLACING CONCRETE & USING TOP CAST: |
|
USER GUIDE TO TOP CAST: |
|
|
Cure and Seal Chemicals: |
|
|
GUIDE TO CURES AND SEALS: |
|
APPLICATION TIPS FOR HIGH SOLID SEALERS: |
|
|
Voc Solvent Base: |
|
| AC1315 Flat
Finish Cure Seal
(VCI-AC1315BF) |
|
Flat finish cure seal with 25% Solid. ASTM C1315 Type 1 Class A. |
|
|
|
| Dayton Superior Cure & Seal
25% J22UV
(DSC-J22UV) |
| Cure & Seal 25%
J22UV is an acrylic copolymer cure, seal and dustproofing
compound in an aromatic solvent containing 25% solids with
special U.V. stabilizers. The higher acrylic solids content will
form an excellent surface coating with a high gloss finish and
will provide an outstanding cure performance. Cure & Seal 25%
J22UV is ultraviolet light stable and resists yellowing.
Features:
High Solids; Cures (Meets ASTM C-309); Cures & Seals
(Meets ASTM C1315 Type 1
Class A.); Dustproofs; Forms a Clear
Film; U.V. Stable, Resists yellowing. |
|
|
|
| Dayton Superior Cure & Seal
30% J23UV
(DSC-J22UV) |
| Cure & Seal 30%
J23UV is an 30% solids acrylic copolymer cure, seal and
dustproofing compound in an aromatic solvent containing special
U.V. stabilizers. The higher acrylic solids content will form an
excellent surface coating with a high gloss finish and will
provide an outstanding cure performance.
Features:
High Solids content; Cures (Meets ASTM C-309); Seals
&Protects Concrete; Dustproofs; Forms a Clear
Film; U.V. Stable, Resists yellowing. |
|
|
|
| Dayton Superior Cure & Seal
LV J 20UV (DSC-J20UV) |
| Cure & Seal LV 25%
J20UV is an acrylic copolymer cure, seal and dustproofing
compound in an aromatic solvent containing 25% solids. It is
designed for ease of application and better atomization when
spraying in a wide temperature range from 35°F to 90°F (2°C to
32°C). Cure & Seal LV 25% J20UV will be ultraviolet stable and
resist yellowing. The higher acrylic solids content will form an
excellent surface coating with a high gloss finish that provides
an outstanding cure performance. Features:
Sprays well in warm & cool temperatures; U.V.
Stable, Resists yellowing. Cures (Meets ASTM
C-309); Seals &Protects Concrete; Dustproofs. |
|
|
|
| AC1315 Concrete Stain (VCI-AC1315CS) |
|
A ready-to-use, non-fading colored coating. Enhances and
revitalizes with a hardened, wear-resistant surface. Deep
penetrating for uniform, long lasting color. |
|
| AC 25
(VCI-AC25) |
| Gloss
Finish Cure Seal with 25% solids ASTM C1315 Type 1 Class B.
The formulation contains no
modifiers or extenders that can
cause cure and seal to yellow, blush or look non-glossy. |
|
|
|
| AC 30
(VCI-AC30) |
|
High Gloss Finish Cure Seal with 30% solids ASTM C1315 Type 1 Class
B. The formulation contains
no modifiers or extenders that can
cause cure and seal to yellow, blush or look non-glossy |
|
|
|
| Certi-Vex®
Guard Clear (VCI-CVGC) |
|
Proprietary acrylic-silane, ready to use, deep penetration,
maximum abrasion resistance and
protection
from harmful salts,
water and UV with a protective glossy coating enhancing the
appearance of any concrete
surface. The product can be applied
to existing and new damp concrete surfaces without whitening. |
|
|
|
| Certi-Vex®
Guard CACS (VCI-CVGCACS) |
|
Colored proprietary acrylic-silane, ready to use, deep
penetration, maximum abrasion resistance and
protection from
harmful salts, water and UV with a protective colored coating
enhancing the appearance
of any concrete surface.
The
product can be applied to existing and new damp concrete
surfaces without whitening.
|
|
|
|
|
VOC Water Base: |
|
| Dayton Superior Cure & Seal
1315 J22WB (DSC-J22WB) |
| Cure & Seal 1315
J22WB is a water based acrylic copolymer containing 25% solids
that offers outstanding curing, sealing and dustproofing for
freshly finished concrete surfaces. The high solids content will
form a long lasting surface membrane with a high gloss finish
that will provide excellent cure performance. This product dries
to produce a non-yellowing, durable, clear film on concrete.
Cure & Seal 1315 J22WB is ideal for interior applications
because it is free of noxious fumes and it is non-flammable.
Features:
Water Based; High Solids content; High Gloss Sealer &
Dustproofer, Low Odor, Ideal for Interior Applications;
Non-Flammable; Easy Clean-UP with Water; Interior/Exterior;
Surpasses the ASTM C-309 & ASTM C 1315
specifications as a superb membrane forming curing compound
|
|
|
|
|
|
| Dayton Superior Cure & Seal
309 J18 (DSC-J18WB) |
|
| Cure & Seal 309 J18
is a water based acrylic copolymer that offers a combination
curing, sealing and dustproofing for freshly finished concrete
surfaces. This product dries to produce a non-yellowing,
durable, clear film on concrete. Cure & Seal 309 J18 is ideal
for interior applications because it is free of noxious
flammable fumes. Features:
Water Based; Meets ASTM C-309 specifications
as a effective curing compound Excellent Sealer &
Dustproofer, Low Odor; Non-Flammable; Easy Clean-UP with Water;
Interior/Exterior applications. |
|
|
|
|
VOC Water Based/Earth Friendly |
| Dayton Superior Cure & Seal
1315EF (DSC-1315EF) |
|
Cure & Seal 1315 EF is an Earth Friendly (EF)
non-yellowing 30% solids acrylic copolymer curing and sealing
compound that may contribute to LEED Credits. The Cure & Seal
1315 EF formula is low odor and contains VOC < 100 g/L, making
it VOC compliant in all areas. Cure & Seal 1315 EF cures, seals
and dustproofs freshly finished concrete surfaces. Cure & Seal
1315 EF is designed to be used on freshly finished concrete as
an earth friendly membrane forming curing compound that
surpasses the requirements of ASTM C-309 and C-1315
Features:
May Contribute to LEED credits; Earth Friendly (EF),
VOC<100g/L; VOC compliant in all regions; Ultra UV Stable,
Non-yellowing; Attractive Gloss Finish; Cures/Seals/
Dustproofs new concrete; Low Odor; Non-Flammable; Safe to Use
and Store; Meets ASTM C-1315. |
|
|
|
| Dayton Superior Cure & Seal
309 EF
(DSC-309EF) |
|
Cure & Seal 309 EF is an Earth Friendly (EF)
non-yellowing acrylic copolymer curing and sealing compound that
may contribute to LEED Credits. The Cure & Seal 309 EF formula
is low odor and contains VOC < 100 g/L, making it compliant in
all areas. Cure & Seal 309 EF cures, seals and dustproofs
freshly finished concrete surfaces.
Cure & Seal 309 EF is designed to be used on
freshly finished concrete as an earth friendly membrane forming
curing compound that surpasses the requirements of ASTM C309.
Features:
May Contribute to LEED credits; VOC compliant in all regions;
Ultra UV Stable, Non-yellowing; Attractive Gloss Finish;
Cures/Seals/ Dustproofs new concrete; Low Odor; Non-Flammable;
Safe to Use and Store; Meets ASTM C-309. |
|
|
|
| StarSeal® 30% High Gloss Finish
Low Odor
(VCI-SS30) |
| High gloss, cost effective, superior
wear resistance, low odor, water repellent, resistant to
yellowing and many chemicals. Quickly forms a hard, crystal
clear durable protective film that can be applied to interior or
exterior and damp concrete surfaces without whitening. |
|
|
|
| StarSeal® 1315
Concrete Stain (VCI-SS1315CS) |
| A low
odor, ready-to use, non-fading colored coating. Enhances and
revitalizes with a hardened,
wear resistant surface. Deep
penetrating for uniform, long lasting color on horizontal
surfaces.
|
|
|
|
| StarSeal® Vertical
Concrete Stain (VCI-SSVCS) |
| Vertical applications, colored, low
odor, excellent wear and chemical resistance. Will enhance and
revitalize
the appearance of new and existing concrete surfaces. Apply
to interior or exterior and damp concrete surfaces without whitening. |
|
|
